Ping pong table dimensions

A regulation table tennis table is 2.74 m long, 1.525 m wide and 76 cm high — 9 ft by 5 ft, standing 2 ft 6 in off the floor. The net is 15.25 cm (6 in) high and overhangs each side by the same amount.

On this page

  1. Official dimensions
  2. Markings and surface
  3. How much room you need
  4. Mini, midi and three-quarter tables
  5. Folding and outdoor tables

Official dimensions

MeasurementMetricImperial
Length2.74 m9 ft
Width1.525 m5 ft
Height from floor76 cm2 ft 6 in
Net height15.25 cm6 in
Net overhang, each side15.25 cm6 in
Playing area4.1775 m²45 sq ft
ITTF regulation dimensions — identical for singles and doubles.

There is no separate doubles table. The same surface serves both; doubles simply uses the centre line that singles ignores.

Markings and surface

  • A 2 cm white line runs along each edge — the side lines and end lines.
  • A 3 mm white centre line splits the table lengthwise into two half-courts, used only for doubles service.
  • The surface is a uniformly dark, matte colour — usually deep blue or green — so the white or orange ball stays visible.
  • The ITTF specifies bounce rather than thickness: a ball dropped from 30 cm must rebound about 23 cm, evenly across the whole surface.

Because the standard is written as a bounce test, table thickness is a manufacturer's choice. Competition tables are typically 22–25 mm; thinner tops bounce lower and less consistently.

How much room you need

The table is only part of the footprint. Players spend most of a rally behind the end line, so clearance matters more than the table's own dimensions.

LevelPlaying space (L × W)
World and Olympic events14 m × 7 m
National and international competition12 m × 6 m
Club and local competition10 m × 5 m
Recreational — the practical minimumAbout 2 m clear behind each end

For a garage or basement, the clearance behind each end is the number that decides whether the room works. A full-size table in a space with a metre behind it plays like a much smaller table.

Mini, midi and three-quarter tables

Retailers sell three common step-downs from regulation size, none of them standardised — dimensions vary by manufacturer. They are legitimate for practice and for children, and none is legal for competition. If you are learning strokes you intend to use on a full table, the distances you build muscle memory for will be wrong.

NameTypical lengthTypical use
Three-quarter~2.1 mSmall rooms, older children, casual rallying
Midi~1.8 mTight spaces, family play
Mini~1.4 m or lessYoung children, tabletop or desk play
Sizes vary between brands — always check a specific product's listed dimensions rather than assuming these figures.

Folding and outdoor tables

Folding tables keep the regulation 274 × 152.5 × 76 cm playing dimensions but fold at the centre line into playback mode (one half stands vertically as a rebound wall for solo practice) or fold flat on wheels for storage. Folding doesn't change any of the official numbers above — a compliant folding table still measures the same as a fixed one when set up.

Public outdoor tables are usually poured concrete or welded steel rather than a folding frame, built to the same length, width and 76 cm height, but often finished with a solid metal net or divider instead of a mesh net. For the height and net specifics of both indoor and outdoor tables, see our dedicated guides on table height and net height.

Frequently asked questions

What are the dimensions of a regulation ping pong table?

2.74 m long, 1.525 m wide, and 76 cm high — or 9 ft by 5 ft, standing 2 ft 6 in off the floor. The same dimensions apply to singles and doubles.

Are mini and midi tables the same size for everyone?

No. Unlike the regulation table, mini and midi sizes aren't standardised — dimensions vary between manufacturers, so check the listing for a specific product rather than assuming a fixed figure.

How much space do you need around a ping pong table?

Club competition uses a 10 m × 5 m playing space. For recreational play, allow at least 2 m of clear floor behind each end — that clearance matters more than the width.

How thick is a competition table tennis table?

Typically 22–25 mm, though the ITTF specifies bounce rather than thickness: a ball dropped from 30 cm must rebound roughly 23 cm evenly across the surface.

What is the white line down the middle of the table for?

It is the 3 mm centre line, used only to judge the diagonal serve in doubles. In singles it counts as part of the playing surface.

Find a table near you

Now find a table

Thousands of public ping pong tables are mapped on League of Spin — outdoor tables, clubs, and bars, with directions and ratings for each one.

Find a table near you

Keep reading